RF Series Automated Centrifugal Disc Finishing Systems
For those seeking a truly automated centrifugal disc finishing solution, the Automated RF-Series offers fully automated systems that revolutionize the centrifugal disc finishing process. Available in four different models, ranging from the RF-100A to the RF-400A, these systems incorporate automated loading, weighing, finishing, separating, and washing processes, eliminating the need for manual intervention and streamlining production. With the ability to adjust from heavy to medium grinding or polishing, these machines are suitable for various parts and materials.
The Automated RF-Series boasts a built-in media separator for continuous operation, controlled via a user-friendly touchscreen PLC interface that allows for adjustable cutting and finishing speeds. This results in shorter finishing times compared to conventional methods while ensuring uniform isotropic finishing. Operating the Centrifugal Disc Finisher is a straightforward process: simply manually load the barrel with media, parts, and compound, set your desired parameters on the PLC controller, switch to “auto mode,” and press the machine start button to commence the automated process.
The Automatic Centrifugal disc finishing systems from Mass Finishing, Inc offers lower operating costs and better finishing performance than vibratory finishers. The RF-Series can perform a wide range of deburring and polishing functions at speeds 10 to 30 times faster than those of vibratory finishers. Contact us at Finishing Rx to determine the process that best fits your application needs.
– Streamlined operations through automated loading, weighing, finishing, separating, and washing processes.
– User-friendly operation and precise parameter settings enabled by the PLC touchscreen interface.
– Variable Frequency Drive allows motor speed adjustment, ensuring flexible control over cutting and finishing speeds.
– RPM Meter to display the disc speed.
– Amp Meter to monitor electrical current.
– Variable Digital Process Timer for customizable operation times and accurate timing of finishing cycles.
– Finish Cycle Buzzer to alert operators when a cycle is complete.
– Polyurethane Lining to protect against wear and extend machine life.
– Upflow Drain System, where water is pushed up through the disc gap and drains toward the top of the machine.
– Ideal Unload Height for ergonomic handling of finished parts.
– Hydraulic Disc Unload for efficient removal of finished items.
|
Model No. |
Working Capacity (Cu Ft.) |
Tank Capacity (Liters) |
Barrel Size (In) |
Drive HP |
Overall Dimensions (In) |
|
RF-100A |
2.1 |
133 |
24 x 16 |
5 |
60 x 40 x 52 |
|
RF-200A |
3.6 |
200 |
34 x 20 |
7.5 |
93 x 77 x 56 |
|
RF-300A |
4.5 |
227 |
36 x 21 |
7.5 |
121 x 84 x 55 |
|
RF-400A |
7.5 |
362 |
42 x 25 |
15 |
136 x 90 x 61 |