OTM-3000LM
The OTM -3000 is designed in a modular concept that allows customers the ability to add custom processes or add machine capabilities when needed. Examples of things that can be added; inspection, transfer to other machines, and any other customer specific needs.
Machine Benefits & Features
– Continuous motion assembly process.
– Spring loaded pins on an upper cam follower to ensure accurate OAL and smoot bullet seating.
– Sound enclosure.
– OTM-300A feed system cases and bullets.
– Primer direction check with “bad part” eject.
– Mouth flaring station.
– Powder drop with volumetric measuring system.
– Bullet seat and crimping stations.
– In process bullet OAL check and bad part eject.
– Rotary cartridge insert that is mechanically timed to prevent from having operator adjustment.
– Stack light indicators to let the operator know feeder levels are low.
– Large touch screen PLC for machine controls.
– Internet connectivity for offsite machine troubleshooting.
– Product manual (digital and hard copy) that will include recommended ware parts, and daily maintenance.
– All steel parts will be heat treated and surface ground to prevent premature ware.
– 240 PPM+ run rate for 5.56 & 7.62.
– 300 PPM+ run rate for 9mm & 45 ACP.
– Power requirements 220V or 480V.
– 190” X 65” X 130” floor space.
– E-stop and other safety features.
– Machine guarding in ¼” clear polycarbonate.
– Safety sensors on machine guarding.
– All parts machined from billet aluminum, steel and stainless.
– All fasteners are stainless steel to prevent corrosion issues.
– All parts that can be will be coated for corrosion prevention.
– Solid steel frame and no blind holes to prevent areas where primer compounds can gather and cause danger.
– Using solid steel instead of square tubing also adds weight which leads to machine rigidity.
– Smooth surfaces and removable guarding to ensure easy clean up and maintenance.
– Continuous motion assembly process.
– Spring loaded pins on an upper cam follower to ensure accurate OAL and smoot bullet seating.
– Sound enclosure.
– OTM-300A feed system cases and bullets.
– Primer direction check with “bad part” eject.
– Mouth flaring station.
– Powder drop with volumetric measuring system.
– Bullet seat and crimping stations.
– In process bullet OAL check and bad part eject.
– Rotary cartridge insert that is mechanically timed to prevent from having operator adjustment.
– Stack light indicators to let the operator know feeder levels are low.
– Large touch screen PLC for machine controls.
– Internet connectivity for offsite machine troubleshooting.
– Product manual (digital and hard copy) that will include recommended ware parts, and daily maintenance.
– All steel parts will be heat treated and surface ground to prevent premature ware.
– 240 PPM+ run rate for 5.56 & 7.62.
– 300 PPM+ run rate for 9mm & 45 ACP.
– Power requirements 220V or 480V.
– 190” X 65” X 130” floor space.
– E-stop and other safety features.
– Machine guarding in ¼” clear polycarbonate.
– Safety sensors on machine guarding.
– All parts machined from billet aluminum, steel and stainless.
– All fasteners are stainless steel to prevent corrosion issues.
– All parts that can be will be coated for corrosion prevention.
– Solid steel frame and no blind holes to prevent areas where primer compounds can gather and cause danger.
– Using solid steel instead of square tubing also adds weight which leads to machine rigidity.
– Smooth surfaces and removable guarding to ensure easy clean up and maintenance.
Machine Specs
|
Model |
OTM-3000 |
|
Weight |
11,850 lbs |
|
Electrical |
480V |
|
Air Requirements |
100 psi |
|
Drive |
10 HP and Gear Box |
|
Caliber Range |
380 ACP – 338 Lapua (caliber specific) |
|
Production Rate |
300+ ppm (Pistol) / 240+ ppm (Rifle) |
|
Feed Systems |
(2) OTM-160A and (2) OTM-240A |