Carindal 2400 Tumble Blast – 24.0 Cubic Foot Foundry Duty

STANDARD FEATURES
– 2-20 HP Direct Drive Blast Wheel Assy.
– Max workload 3,000lb or 24 Cubic Feet
– 15″ Diameter Blast Wheels
– Electrical 480/240/3PH
– Digital Type Timer
– Mill Belt Delay Timer
– Low Noise Level
– Safety Interlocks
– Cast Barrel Heads
– Abrasive resistant door
– Reversing Mill Belt
– Cross Rigid 5/16″ Hole Mill Belt
– Pneumatic Lift Door
– Air Wash Separator
– Foundry Duty Elevator
– Adder Hopper and Low Level media sensor
– Hydraulic Loader
– Vibratory Takeaway Conveyor
– Dust Collector Control Circuit, up to 10HP, included
– Requires 4000 CFM Dust Collection

CENTRIFUGAL BLAST WHEEL

WHEEL: Two efficiently designed single-sided blast wheels minimizes the overhung load on the motor and reduces the time required to change blades, impellers, and control cage. The standard blast wheel measures 15” in diameter and features seven curved blades for optimal abrasive control. All components are balanced to ensure smooth operation. With a high horsepower-to-weight ratio, this system enhances abrasive delivery efficiency per unit of horsepower.

MOTOR: Direct drive motor revolves at 3600 RPM. Taper lock brushed motor shaft with NEMA tolerance.

BLADES: Our innovative Snap Lock system simplifies blade replacement without the need for tools. Crafted from abrasion-resistant alloy in our in-house foundry, our curved blades offer optimal abrasive control. Cardinal shot blast wheels allow for effortless blade replacement in sizes 12”, 13.5”, or 15”, enhancing shot velocity and increasing versatility.

CONTROL CAGE: Dial type cage for ease of targeting the abrasive flow. 

WHEEL HOUSING: Our wheel housings are made from durable steel plate and are fully lined with replaceable cast chrome manganese alloy liners produced in our own foundry.

MILL CONSTRUCTION

CONVEYOR: Our premium Cross Ridgid, Continuous Molded Rubber Tumble Belt, featuring a durable 4-ply construction, standard 5/16” diameter abrasive drain holes, and rubber tumbling ridges and variable speed drive for enhanced performance Customize your setup with a range of optional drain hole sizes to suit your specific needs. 

CONVEYOR ROLLERS: Our robust Heavy Duty Rollers boast sturdy, solid shafts and are secured to the cabinet with standard 4-bolt flange bearings for optimal stability.

LINERS:  The 48” diameter barrel heads are cast and complemented by tight-sealing cabinet liners that are easily removable for convenient belt access. Explore the optional liner packages to further enhance your setup and elevate your machine durability and performance. 

CONVEYOR SPEED: 12 FT/MIN, variable speed available

CAPACITY: 58” wide by 48” diameter mill will handle 24.0 cubic feet or 3,000 pounds. 

 

CABINET CONSTRUCTION

CABINET: Crafted from durable 3/4” steel plate, our cabinet construction promises unparalleled durability and reliability. Thoughtfully designed access holes on the sides make belt and liner replacement a breeze, enhancing maintenance efficiency. Additionally, tramp metal is effectively captured on lower abrasive screens, ensuring that large debris is meticulously filtered out before it can reach the abrasive hopper, maintaining optimal blasting performance and equipment longevity.

DOOR: Abrasive resistant door is rubber lined and secured by an air operated power lock. 

ABRASIVE RECYCLING SYSTEM

ELEVATOR: Our belt and bucket elevator features centrifugal discharge and is outfitted with a 6-inch elevator belt along with cast buckets. The screw-adjusted shaft take-ups guarantee accurate belt alignment. The abrasive shot blast media is efficiently conveyed by the buckets to the hopper positioned above the machine, where the media will flow to the shot blast wheel.

CABINET SCREEN The Rotary Screen consists of a metal drum with 1/4″ perforations and an internal auger, specifically designed to effectively screen larger debris from the Media and discharge it out of the system. The screened Media then proceeds through to the hopper.  The primary lower screen is upgraded to 1”  mesh size for enhanced screening efficiency.

ABRASIVE CONTROL VALVE: Totally enclosed butterfly valves are air cylinder operated. Fully adjustable for abrasive flow control.

ABRASIVE SEPARATOR: The Dual, 30” Lip Separator, also known as a media air wash, efficiently removes fines and dust from blasting media, ensuring only clean, heavy media is recycled through the shot blast wheel. As media is returned to the hopper above the blast wheel, it spreads into a waterfall, creating a thin blanket of flowing media. A dust collector then pulls air across this stream, eliminating unwanted particles and allowing clean media to return to the abrasive hopper, ready for reuse. This process maintains high-quality blasting media, enhancing the effectiveness and longevity of the blasting operation.

ABRASIVE REQUIRED: 3,000 pounds.
 

VENTILATION

DUST COLLECTION: Effectively eliminates dust-laden air from the machine, ensuring a cleaner work environment. It incorporates dual, 30-inch lip separator that efficiently separates fines and dust from larger abrasives, keeping the media clean as it is returned to the blast system. The machine requires a 4000 CFM dust collector, sold separately. Collector control circuit pre-wired on all Cardinal Shot blasters for easy integration. 

ELECTRICAL CONTROLS

CONTROL PANEL:

• Type 12 electrical enclosure.
• Thermal overload protection for all motors.
• Standard 230/460 volt ammeter.
• Oil tight push button controls.
• Timer controls the abrasive flow.
• Touch Screen PLC Controls.

SAFETY FEATURES: The blast wheel operates exclusively when the door is shut. An air lock mechanism ensures that the cabinet door remains securely closed throughout the blasting process. With an adjustable time delay feature, the flow of abrasives serves as a brake on the blast wheel before the door can be safely opened.

ELECTRIC MOTORS: All motors are totally enclosed, and fan cooled to provide maximum life. Optional 230/460 volt 3-phase.

Blast Wheel 2-20 Hp/3540 RPM – 46.2amps @ 460 volts

Mill Drive 5 Hp/1725 RPM – 12.6amps @ 460 volts

Elevator Drive 5 Hp/1800 RPM – 12.6amps @ 460 volts

Rotary Screen 1.0 Hp/1725 RPM – 3.4amps @ 460 volts

Lower Auger 1.0 Hp/1725 RPM – 3.4amps @ 460 volts

Upper Auger 1.0 Hp/1725 RPM – 3.4amps @ 460 volts

Shaker Conveyor 3Hp/1725RPM – 3.8amps @ 460 volts

Hydraulic Loader 5Hp/1725RPM- 12.6amps @ 46 volts

Dust Collector 10 Hp/3600 RPM – 12.6amps @ 460 volts

NOISE LEVEL: Approximately 90 db. 

DIMENSIONS:

• Width: 159” 
• Depth: 105” 
• Height: 206”  

SHIPPING WEIGHT:  Approximately 19,000 pounds.