Select Page

Powders Cleaning & Deburring Compounds

Powdered deburring compound is formulated to assist burr removal by keeping the parts & media clean. This type of compound also provides corrosion resistance to the parts and media.

ALKALINE (540): No Abrasive added. Alkaline cleaning system that contains potent wetting and dispersing agents coupled with a refined alkaline build. Compound, for cleaning, grinding and deburring all metals, retards rust, keeps media clean, prevents loading and glazing of abrasive media. Excellent rinsing properties.

pH range .5%/2.0%: 8.7
Best for ferrous and mos non-ferrous

ACID (16): Acid Descaler, deburrs, descales and polishes parts and restores true color from long grinding cycles. Eliminates manual cleaning of parts prior to finishing. Use with all media types. Minimizes risk of hydrogen embrittlement.
pH range .5/2.0%: 1.3/2.3
Used for iron, steel, stainless alloys, copper, bronze and brass.

ALKALINE (2): No Abrasive added. Near neutral pH Compound, for cleaning, grinding and deburring all metals, retards rust, keeps media clean, prevents loading and glazing of abrasive media. Very effective on aluminum.

pH range .5%/2.0%: 8.7
Best for iron, steel, stainless alloys, copper, bronze, brass, aluminum alloys, zinc and magnesium.

ALKALINE (2A): No Abrasive added. Near neutral pH Compound – Low Foam, same as No.2. For vibratory use, it is very effective on non-ferrous metals.

pH range .5%/2.0%: 8.7
Best for iron, steel, stainless alloys, copper, bronze, brass, aluminum alloys, zinc and magnesium.

ALKALINE (7A): No Abrasive added. Heavy Duty, highly alkaline compound for grinding and cleaning operations. Non-foaming, producing high colors on ferrous metals and keeps media free from loading. Saponifies and emulsifies heavy fatty oils and greases, excellent rust inhibitor.

pH range .5%/2.0%: 11.2/12.2
Best for iron, steel and stainless alloys.

ALKALINE (3): Abrasive. All Purpose, aggressive cutting, medium fine aluminum oxide for use with all types of media to increase material removal rate on flat surfaces and provides normal finishing on corners.

pH range .5%/2.0%: 8.5/9.5
Best for iron, steel, stainless alloys, copper, bronze, brass, aluminum alloys, zinc and magnesium.

ALKALINE (5): Abrasive. Fast Grinding, of all metals, normal life, quartz based, low foam, use with all media types, leaves a fine micro inch finish, moderately alkaline.

pH range .5%/2.0%: 10/11
Best for iron, steel, stainless alloys, copper, bronze, brass and zinc.

ALKALINE (58): Abrasive. Extra Heavy Duty, long life abrasive, medium fine grit aluminum oxide/silicon carbide to blend parting lines, remove stock and heavy burrs on all metals when long grinding cycles and large amounts of scale, burrs or stock is to be improved.

pH range .5%/2.0%: 7
Best for iron, steel, stainless alloys, copper, bronze, brass, aluminum alloys, zinc and magnesium.

ALKALINE (7A58): Abrasive. Very Coarse, highly alkaline, 60 to 220 grit, rapid cutting aluminum oxide, low foaming, long life. Use with all types of media.

pH range .5%/2.0%: 9/9.5
Best for iron, steel, stainless alloys, copper, bronze, brass, aluminum alloys and zinc.

ALKALINE (40B): Abrasive. Silica Flour Abrasive, for an ultra-low fine micro inch finish on all metals. No impregnation leaves a light satin finish.

pH range .5%/2.0%: 7.8/8.5
Best for iron, steel, stainless alloys, copper, bronze, brass, aluminum alloys, zinc and magnesium.

ALKALINE (570S): Abrasive. Aggressive Grinding, concentrated slightly alkaline compound, all purpose for use on any metals or media type, fast cutting. An economical alternative to aluminum oxide, low-foaming, long lasting, rinse free.

pH range .5%/2.0%: 7.5/8.5
Best for iron, steel, stainless alloys, copper, bronze, brass, aluminum alloys, zinc and magnesium.

ALKALINE (3SC): Abrasive. Silicon Carbide Compound, medium fine, for use on all metals, fast cutting when mixed with all media types, recommended for stainless steel.

pH range .5%/2.0%: 7.5/8.5
Best for iron, steel, stainless alloys, copper, bronze, brass, aluminum alloys, zinc and magnesium.

Tell Us About Your Project