Cardinal 36” XTS Table Blaster – Extra Tall, Spinner Table
The 36″ XTS table shot blaster is an exclusive model in the Cardinal line of Shot Blasters. Building on the XT model, the XTS two side-mounted wheels rotate in opposite directions—one clockwise and the other counterclockwise. This innovative blast pattern is inspired by the spinner hanger system concept. When used with a “fixture tree,” parts are effectively blasted from both top-down and bottom-up, ensuring efficient and thorough processing of all parts on the fixture. Additionally, the built-in dust collector not only conserves space but also reduces capital investment expenses, making it a practical and cost-effective solution for businesses aiming to optimize their surface preparation processes. This shot blaster is ideal for firearm manufacturing facilities that need to prepare components for anodizing or ceramic coating finishes. Cardinal is the only shot blasting company offering machines, fixtures, and proven processes specifically tailored for this application. It serves as a cost-effective alternative to a dual-chamber spinner hanger.
– (2) 5hp Direct Drive Blast Wheel Assemblies
– Working Dimensions: 36″ Diameter, 40″ High
– Airwash Separator
– Max workload 1,000 lbs
– 10″ Diameter Blast Wheels
– Electrical 480/208/3ph
– PLC Controlled Timer
– Low Noise Level
– Safety Interlocks
– AR400 Table Liner
– Table Jog
– Pit Less Design
– AR400 Cabinet
– Manganese RH Wall, Left & Rear Wall Rubber Lined
– Pneumatic Roof Hatch for Easy Table Loading
– Integrated 800 CFM Dust Collector
CENTRIFUGAL BLAST WHEEL
WHEEL: An efficiently designed single-sided blast wheel minimizes the overhung load on the motor and reduces the time required to change blades, impellers, and control cage. The standard blast wheel measures 10” in diameter and features four curved blades for optimal abrasive control. All components are balanced to ensure smooth operation. With a high horsepower-to-weight ratio, this system enhances abrasive delivery efficiency per unit of horsepower.
MOTOR: Direct drive motor revolves at 3600 RPM. Taper lock brushed motor shaft with NEMA tolerance.
BLADES: Our innovative Snap lock system simplifies blade replacement without the need for any tools. Crafted from abrasive-resistant alloy in our in-house foundry, our curved blades offer optimal abrasive control. Cardinal shot blast wheels facilitate effortless blade replacement.
CONTROL CAGE: Dial type cage for ease of targeting the abrasive flow.
WHEEL HOUSING: Our wheel housings are made from durable steel plate and are fully lined with replaceable cast chrome manganese alloy liners produced in our own foundry.
TABLE CONSTRUCTION
TABLE: A rotating table measuring 36 inches is constructed from a 1/4-inch steel plate and features an AR400 liner. Additionally, it offers an optional Variable Speed Drive.
OPTIMUM WORKING DIMENSIONS: 36” Diameter or diagonal, 40” high. Work Loading height is 27” with 1,000 pound capacity.
CABINET CONSTRUCTION
CABINET: Crafted from durable 1/4” abrasion-resistant plate, this shot blaster is engineered to withstand the toughest conditions. Tramp metal is efficiently collected on the lower abrasive screens, ensuring smooth operation. For added convenience, the cabinet can be notched to accommodate an overhead hoist, making maintenance loading more efficient.
LINERS: Rubber lined cabinet with abrasive resistant liners in line with blast wheel.
DOOR: Air operated power lock. 1/4” abrasive resistant door, rubber lined.
ABRASIVE RECYCLING SYSTEM
ELEVATOR: The bucket elevator system features cast iron sheaves and metal-stamped buckets. Our design ensures precise tracking and simple adjustments by employing a heavy-duty C-section banded V-belt elevator belt with a multi-cord construction. The abrasive shot blast media is transported by the metal-stamped buckets to the hopper situated above the machine. All of our shot blast media hoppers come with a screen to prevent larger debris from entering the shot blast wheel.
ABRASIVE CONTROL VALVE: Totally enclosed butterfly valves are air cylinder operated. Fully adjustable for abrasive flow control.
ABRASIVE SEPARATOR: The Single 10” Lip Separator, also known as a media air wash, efficiently removes fines and dust from blasting media, ensuring only clean, heavy media is recycled through the shot blast wheel. As media is returned to the hopper above the blast wheel, it spreads into a waterfall, creating a thin blanket of flowing media. A dust collector then pulls air across this stream, eliminating unwanted particles and allowing clean media to return to the abrasive hopper, ready for reuse. This process maintains high-quality blasting media, enhancing the effectiveness and longevity of the blasting operation.
ABRASIVE REQUIRED: 400 pounds.
VENTILATION
DUST COLLECTION: Effectively eliminates dust-laden air from the machine, ensuring a cleaner work environment. It incorporates a single 10-inch lip separator that efficiently separates fines and dust from larger abrasives, keeping the media clean as it is returned to the blast system. Additionally, the machine features an integrated 800 CFM Dust Collector that is securely mounted with support legs for stability and optimal performance.
ELECTRICAL CONTROLS
CONTROL PANEL:
- Type 12 electrical enclosure.
- Thermal overload protection for all motors.
- Standard 230/460 volt ammeter.
- Oil tight push button controls.
- Timer controls the abrasive flow.
- Touch Screen PLC Controls.
SAFETY FEATURES: The blast wheel operates exclusively when the door is shut. An air lock mechanism ensures that the cabinet door remains securely closed throughout the blasting process. With an adjustable time delay feature, the flow of abrasives serves as a brake on the blast wheel before the door can be safely opened.
ELECTRIC MOTORS: All motors are totally enclosed, and fan cooled to provide maximum life. Optional 230/460 volt 3-phase.
Blast Wheel #1: 5 Hp/3510 RPM – 6.3amps @ 460 volts
Blast Wheel #2: 5 Hp/3510 RPM – 6.3amps @ 460 volts
Table Drive: 1/2 Hp/1140 RPM – 1.2amps @ 460 volts
Elevator Drive: 3/4 Hp/1800 RPM – 1.4amps @ 460 volts
Dust Collector: 3 Hp/3600 RPM – 3.8amps @ 460 volts
NOISE LEVEL: Approximately 85 db.
DIMENSIONS
DIMENSIONS:
- Width: 77”
- Depth: 63”
- Height: 142”